TABLE OF CONTENTS

• E10: Sync setup for Xuno
• Adding Xuno as a sync system
• Configuring Xuno to Sync
• Syncing to Xuno 
• Go to File > Synchronise >Sync NowSelect 'Xuno' from the 'Filter' drop down on the top rightClick on Basic/Advanced syncSet date range and what you would like to syncClick 'Sync'

E10: Sync setup for Xuno

E10 supports the syncing of data to Xuno. The following is what can be sent to Xuno through the sync:

1. Date-to-Cycle-day mapping
   
2. Teachers
   
3. Class lists
   
4. Bell Times
   
5. Classes
   
6. Cyclical Timetable
   
7. Daily Timetable

Adding Xuno as a sync system

To add Xuno as a sync system so you can start syncing:

1. Go to File > Synchronise > Configure > Sync tab
   
2. Click on the '+' button
   
3. Select 'Xuno'  from the drop down menu that is added.

Configuring Xuno to Sync

1. Go to File > Synchronise > Configure
2. Go to the 'Connection' tab
3. Change the 'Filter' on the top right to 'Xuno'
4. Enter the URL, Username and Password provided by Xuno
5. If you have a proxy server - select 'Provide proxy credentials'
6. Click 'Test connection' - If there are no issues. 'The connection seems fine' will appear. If an error pops up, please check the URL, username and password was correctly entered.

Syncing to Xuno 

1. Go to File > Synchronise >Sync Now
2. Select 'Xuno' from the 'Filter' drop down on the top right
3. Click on Basic/Advanced sync
4. Set date range and what you would like to sync
5. Click 'Sync'